multi purpose fabric stand

Make this multi purpose fabric stand in under 30 minutes!

This can be used for tablets, books, e-readers and also phones.

Note: the numbered steps match to the numbered pictures.

What you will need:

+ 2 A4 size pieces of material
+ some polyester stuffing
+ decorative sand or gravel
+ some thread
+ a sewing machine or needle
+ two chop sticks


The first thing you will need to do is set up you're sewing machine, and prepare everything else so it is easy to get when you need it!

 1. Cut out your material, you will need 2 A4 sized pieces of material. If you want a smaller stand adjust the sizes accordingly, but this stand is suitable for multiple items.

2. Sew along the two longer sides and one of the smaller sides( leaving one of the shorter sides open )

3. Turn sideways and open to form a pyramid.

 4. Measure 3 inches in from the open edge and sew 1 1/2 inches in from each side. This is represented as dotted lines on the picture above.

5. Stuff with polyester filling then add some decorative sand or gravel. This acts as a weight and is available from hobby craft and most florists.

6. Sew up the hole, then starting from the open edge place the two chopsticks and roll until it is only 1 inch away from the sewn up hole. Sew along the edges and middle to secure.

Enjoy using your multi purpose fabric stand!!!!

This post won't be here forever, subscribe or print , so you can keep this post and its contents for when you need to use it.